WARNING Risk of injury or death if a seat belt is unfastened while the vehicle is in motion
If the seat belt is released while the vehicle is in motion, the child safety lock is deactivated and the child restraint system is no longer correctly secured. The seat belt is drawn in slightly by the inertia reel and cannot be immediately closed again.
Stop the vehicle immediately in accordance with the traffic conditions.
Activate the special seal belt retractor again and correctly secure the child restraint system.
When enabled, the special seat belt retractor ensures that the seat belts of the front passenger seat and rear seats do not slacken once the child restraint system is secured.
The seat belts on the following seats are equipped with a special seat belt retractor:
Installing a child restraint system:
When installing a child restraint system, always observe the manufacturer's installation and operating instructions as well as the information in this Operator's Manual.
Pull the seat belt smoothly from the seat belt outlet.
Engage the seat belt tongue in the seat belt buckle.
Activating the special seat belt retractor:
Pull the seat belt out fully and let the inertia reel retract it again.
When the special seat belt retractor is activated, you will hear a ratcheting sound.
Push the child restraint system down until the seat belt sits tightly.
Deactivating the special seat belt retractor:
Press the release button of the seat belt buckle.
Hold the seat belt tongue and guide back to the seat belt outlet.