Mercedes-Benz GLC : ASSYST PLUS service interval display / Function of the ASSYST PLUS service interval display
The ASSYST PLUS service interval display on the
Instrument Display provides information on the
remaining time or distance before the next
service due date.
You can hide this service display using the back
button on the left-hand side of the steering
wheel.
Depending on how the vehicle is used, the
ASSYST PLUS service interval display may
shorten the service interval, e.g. in the following
cases:
- Mainly short-distance driving
- When the engine is often left idling for long
periods
- In the event of frequent cold start phases
Mercedes-Benz recommends avoiding such
operating conditions.
You can obtain information concerning the servicing
of your vehicle from a qualified specialist
workshop, e.g. an authorized Mercedes-Benz
Center.
On-board computer:
ASSYST PLUS
The next service due date is displayed.
To exit the display:
press the back button
on the left-hand side of the steering wheel...
Other information:
The immobilizer prevents your vehicle from being
started without the correct SmartKey.
The immobilizer is automatically activated when
the ignition is switched off and deactivated when
the ignition is switched on.
When leaving the vehicle, always take the Smart‐
Key with you and lock the vehicle...
Cornering light function
The cornering light improves the illumination of
the road over a wide angle in the turning direction,
enabling better visibility on tight curves, for
example. It can be activated only when the low
beam is switched on.
The function is active in the following cases:
At speeds below 25 mph (40 km/h) when
the turn signal light is switched on or the
steering wheel is turned
At speeds between 25 mph (40 km/h) and
43 mph (70 km/h) and when the steering
wheel is turned
Roundabout and intersection function: the
cornering light will be activated on both sides
based on an evaluation of the vehicle's current
GPS position...