Mercedes-Benz GLC : Seats and stowing / Installing/removing the floor mats
WARNING Risk of accident due to
objects in the driver's footwell
Objects in the driver's footwell may impede
pedal travel or block a depressed pedal.
This jeopardizes the operating and road
safety of the vehicle.
Stow all objects in the vehicle
securely
so that they cannot get into the driver's
footwell.
Always install the floor mats
securely
and as prescribed in order to ensure that there is always sufficient room for
the pedals.
Do not use loose floor mats and
do not
place floor mats on top of one another.
Installing floor mats

Slide the corresponding seat
backwards and
lay the floor mat in the footwell.
Press studs
onto holders
.
Adjust the corresponding seat.
Removing floor mats
Pull the floor mat off holders
.
Remove the floor mat.
WARNING Risk of injury due to objects
being stowed incorrectly
If objects in the vehicle interior are stowed
incorrectly, they can slide or be thrown
around and hit vehicle occupants...
Other information:
Requirements:
The ignition is switched off.
To activate: press button
for approximately one second.
A visual and audible alarm is triggered.
To deactivate: briefly press button
again.
or
Press the start/stop button on the cockpit, with the SmartKey inside the vehicle...
If Active Blind Spot Assist detects a risk of a side
impact in the monitoring range, a course-correcting
brake application is carried out. This is
designed to help you avoid a collision.
The course-correcting brake application is available
in the speed range between approximately
20 mph (30 km/h) and 125 mph (200 km/h)...