Mercedes-Benz GLC : Head restraints / Adjusting the head restraints of the rear seats mechanically

To raise: pull the head
restraint up.
To lower: press release
knob
in the direction
of the arrow and push the head restraint
down.
WARNING Risk of accident due to
adjusting vehicle settings while the vehicle
is in motion
You could lose control of the vehicle in the
following situations in particular:
If you adjust the driver's seat, the head
restraints, the steering wheel or the mirror
while the vehicle is in motion...
Removing
Release the rear seat backrest
and fold it forwards
slightly.
Pull the head restraint upwards
as far as it
will go.
Push release knob
in the direction of the
arrow and pull out the head restraint...
Other information:
Function of Drive Away Assist
Drive Away Assist can reduce the severity of an
impact when pulling away. If an obstacle is
detected in the direction of travel, the vehicle's
speed is briefly reduced to approx. 1 mph
(2 km/h). If a critical situation is detected, the
symbol appears in the media
display...
Requirements:
The required tire-change tool kit is available.
If your vehicle is not equipped with the tirechange
tool kit, consult a qualified specialist
workshop to find out about suitable tools.
The vehicle is not on a slope.
The vehicle is on solid, non-slippery and level
ground...